WARNING: This Product Contains Nicotine. Nicotine is an Addictive Chemical.

CoilART MAGE RTA 2019

$39.99 $29.59
(You save $10.40)
(No reviews yet) Write a Review
CoilART MAGE RTA 2019

CoilART MAGE RTA 2019

Each CoilArt Mage RTA 2019 Edition will have a unique pattern and coloring due to the nature of the manufacturing. Product images provided only serves as a point of reference.

CoilArt has revamped the Mage yet again with the brand new 2019 Edition. This redesigned rebuildable tank atomizer offers an improved airflow and increased e liquid capacity over its predecessors, as well as a new resin covered style. The 2019 Edition of the Mage RTA is the next step in the evolution of an already great rebuildable tank atomizer. The new 2019 Mage RTA features a larger 25mm base diameter, allowing for increased build deck size and standard e liquid capacity. The standard glass has been modified to have a slight convex shape to increase capacity without adding excess bulk to the atomizer. The Mage 2019 Edition is 28mm in diameter at its widest point with the 4.5ml glass tank installed. The knurled metal body from the CoilArt Mage V2 has been replaced with a smooth resin drip tip, top cap, and airflow adjustment ring. The resin has been combined with a small amount of glitter, giving the finish a slight shimmer when exposed to light.

The Mage RTA 2019 Edition can be broken down into four main segments. The top cap, glass tube, internal barrel, and atomizer base. The top cap consists of the a 810 resin drip tip with a color based on the atomizer selection, has a 21mm diameter silicone ring, and can be removed from the internal barrel with a quarter turn twist. The CoilArt Mage 2019 Edition comes with two convex 4.5ml glass tubes that are 28mm in diameter, eliminating any part of the glass from protruding beyond the diameter of the tank, while still expanding e liquid capacity. The internal barrel has a stainless steel construction and a domed shape to prevent e juice build up and has two large 9mm by 2mm top fill ports. The internal barrel's threading allows the user to control juice flow by reducing the size of the 9mm by 3.5mm external wicking ports. The Mage 2019 Edition has four 1.5mm deep and 2.5mm wide terminal post-less build deck secured with side mounted Flathead screws and accommodates both single coil and dual coil set ups. The positive terminals are separated with PEEK insulation. The internal wicking ports measure in a 10mm by 4mm each. The base of the build deck features twenty 1.4mm air ports in a cross pattern. This airflow leads to two fully adjustable 17mm by 3mm air slots that can be fully adjusted to the user's preference. The resin airflow adjustment ring's rotation is limited by a notch next to the air slot. The base of the CoilArt Mage RTA features a 510 threaded connection. The gold plated contact point is threaded and has a Flathead notch allowing it to be removed. This connection has a PEEK insulated cap that may fall when the contact point is removed. Overall, the CoilArt Mage RTA 2019 Edition is an upgraded version of the Mage V2 with increased airflow and improved design and is not your typical cheap rebuildable tank atomizer.

Features:

  • 25mm Stainless Steel Base Diameter
  • 28mm Widest Diameter
  • 55mm Overall Height
  • 4.5ml Tank Capacity
  • High Capacity Tank Reservoir
  • Quarter Twist Threaded Top Fill
  • Smooth Top Cap
  • Two Large 9mm by 2mm Fill Ports
  • Stainless Steel Plated Stainless Steel Postless Build Deck
  • Dual Coil Postless Build Deck
  • Four Terminal
  • Side Mounted Flathead Screws
  • 1.5mm by 2.5mm Each Terminal
  • Dual Wicking Ports
  • 10mm by 4mm Build Deck Wicking Ports
  • 9mm by 3.5mm External Wicking Port
  • 20 x 1.4mm Honey Comb Airholes Surrounding Terminals
  • PEEK Insulation
  • Dual Adjustable Bottom Airslots
  • 17mm by 3mm Each Airslot
  • Fully Closeable
  • 13mm Bore Tapered Resin 810 Drip Tip
  • 304 Stainless Steel and Glass Construction
  • Gold Plated 510 Contact

It Comes With

  • One CoilArt Mage RTA 2019 Edition
  • One 4.5ml Glass Tank Section (Pre-Installed)
  • One Spare 4.5ml Glass Tank Section
  • One 13mm Wide Tapered 810 Resin Drip Tip
  • Two Spare O-Rings
  • Four Spare Side Mounted Flathead Screws
  • One Flathead Screwdriver

 

Warning:

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire. 

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
We highly recommend using an external battery charger for this battery mods, as it helps with balanced charging and prolong the life of the battery and mod.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. MyVpro.com and any of MyVpro.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
MyVpro.com and any or all of MyVpro.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws