Hohm Tech ONYX OHM 2A Matrix Display Battery Charger

Sold out
$23.99
$16.99

Hohm Tech ONYX OHM 2A Matrix Display Charger

Love the simplicity of Hohm SCHOOL series chargers?   Then here is the candy of chargers.  ONYX OHM is utilizing the same speedy output power of Hohm SCHOOL 2 (2A combined) but is equipped with the upgraded USB-C input.

It doesn’t stop there.  A Matrix I/O screen with a light-bleed shield is on board so it is clearly visible from multiple angles.  We’re just warming up here…

The ONYX OHM charging system is directly influenced by BEV (Battery Electric Vehicles).  How so you may ask.  Let’s list a few here: 1) the displayed SoC (State of Charge) is based on Real-time & Real-world charge % like today’s EV (Electric Vehicles);  2) Omits stratagem data from displaying;  3) Integration of imperative safety features including low-voltage preconditioning, DC overload, overcharge prevention, reverse polarity, cell fault detection, short-circuit prevention, and fire incubation.

There’s more.  The ONYX OHM is equipped with an HPSC microcomputer with a 4.2V automated voltage (V) detection circuit.  Sounds cool, but not as cool as the efficient PWM control technology making CC & CV promote an extra layer of reliable charging.

Last but not least, the ONYX OHM uses >71mm slots to ensure it charges most everyone’s cells without fitment issues.

Every Hohm Tech product is tested and certified by the rightful authorities/laboratories and accredited entities to achieve Compliance & Certification of: CE, ROHS, FCC, Air/Sea Transport, and is backed by Industry Leading PLI.  We do not cut corners. We deliver what we promise… chart-topping performance, capacity, and safety.

Features:

  • Real-Time Charge Status: YES
  • Real-World Charge Status: YES
  • PCB/PCM Cell Compatible: YES
  • Low Voltage Preconditioning: YES
  • USB IPR System: YES (100% Autonomous)
  • Input Type: USB-C (cable included)
  • Charge Rate: 2A combined (1A each slot)
  • Battery Size Compatibility: 34-73mm
  • Compatible Chemistry: Li-ion (3.6V / 3.7V)

    Product Includes:

    • One Hohm School UNO Battery Charger
    • Micro USB Cable
    • Manual

    To ensure your safety and maintain the battery’s life and durability, we recommend you follow these rules:

    • Do not over-discharge or overcharge the battery. Doing so will shorten the battery’s life and sometimes, it can make it pop or leak.
    • Please do not short circuit or it will release massive current.
    • Do not play with fire! Do not dispose any kind of battery in or near any fire.
    • Do not stack more than one battery as it may potentially blowout and cause serious damage to yourself and place.
    • Always check battery’s condition to see if there are signs of wear and tear. If there is, please dispose the battery.
    • Do not dispose batteries into the trash as it is against the state’s laws.

    WARNING: Educate yourself on your battery & charger’s proper uses and handling. There are warnings and safety information to ensure they are used properly and within their capabilities. 

    Consult a certified lithium-ion specialist or certified battery pack assembler if there are any uncertainties or questions on the use of, handling of, installation of, charging of, or storage of lithium-ion batteries. Consumer safety is of utmost importance.

    Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. Myvpro.com and any of Myvpro.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

    Myvpro.com and any or all of Myvpro.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

    When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

    Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.