VapeMons Gladiator 200w Starter Kit

$79.95
$39.95
Color
-
+

VapeMons Gladiator 200w Starter Kit

Adorned in the sigils of the Bronze Age, the Gladiator is Vapemons' champion of vaping, displaying unadulterated power and showmanship in any arena. Protected by a brushed metal exterior exuding regalia and class even in the midst of battle, the Gladiator's advanced chip-set stays unharmed, providing a plethora of essential vaping features such as a 200W output, fully capable temperature control module, and a highly versatile Power Curve Mode. The two 18650 batteries powering the Vapemons' Gladiator are inserted into the bottom-loading bay kept securely shut by the sliding-hinge battery bay door (BATTERIES NOT INCLUDED). The kit includes the Monster Mesh Tank with a capacity of 5mL with included Mesh 0.15 Ohm coil (pre-installed).

Compatible with Smok TFV12 Prince & Monster Mesh Coils.

Gladiator Mod Features:

  • Zinc Alloy Chassis
  • Accepts Dual 18650 Batteries
    • Bottom-Loading Battery Bay
      • Sliding-Hinge Bay Door
    • Individual Battery Monitoring
  • OMNI Chipset
    • Power Curve Mode – Set Custom 10sec Sequence of Wattage Outputs
  • Power Mode:
    • Wattage Range: 5W – 200W
    • Voltage Range: 0.1V – 8.0V
    • Resistance Range: 0.15 ohm – 3.5 ohm
  • TC Mode:
    • Temperature Range: 200°F – 600°F
    • Resistance Range: 0.15 ohm – 3.5 ohm
    • Supports:
      • Nickel (Ni200)
      • Titanium (Ti)
      • Stainless Steel
  • 0.96" OLED Display Screen
  • Front-Mounted Firing Switch
  • Side-Mounted Micro-USB Port
    • Firmware & Charging Capable
      • Max. Charge Rate: 2A
        • Charges from 1% to 90% in ≤2hrs
  • Stainless Steel 510 Threads
    • Gold-Plated Spring-Loaded Positive Pin
  • Safety Protection Suite:
    • Reverse Polarity
    • Short Circuit
    • High/Low Resistance
    • High/Low Input Voltage
    • PCB Temperature Monitoring
  • Dimensions: 89mm x 55mm x 22mm

Monster Mesh Features:

  • Dimensions:
    • Height: 63mm
    • Width: 28mm
    • Weight: 66g
  • Capacity: 5mL
  • Material: Stainless Steel
  • Resistance: 0.15 Ohm

Box Contents:

  • 1x Gladiator MOD
  • 1 x Monster Mesh Tank
  • 1 x Replacement Mesh 0.15 Coil (pre-installed)
  • 1 x Replacement Mesh 0.15 Ohm Coil
  • 1 x Spare Glass Tube
  • 1x Micro USB Cable
  • 1x User Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. Myvpro.com and any of Myvpro.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

Myvpro.com and any or all of Myvpro.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.

You recently viewed

Clear recently viewed