iStick Pico 21700 Kit by Eleaf
iStick Pico 21700 is the latest member of iStick Pico series, which compatibles with both 21700 and 18650 battery cells. It supports max 100W output power and 2A fast recharging. It paired with the Ello tank, a retractable top fill and extendable tank that introduce a new HW1-C coil. Featuring a ceramic wrapped wick system for heat preservation, this HW1-C coil can provide a great and efficient vaping experience with enhanced taste. No battery cell included. You need buy them separately.
- Size: 51 x 26 x 119mm (after extended)
- E-liquid capacity: 2ml (extendable to 4ml)
- Output wattage: 1-100W
- Output voltage: 0.5-9V
- Output mode: VW/Bypass/TC(Ni/Ti/SS/TCR)
- Resistance range: 0.05-1.5ohm (TC modes)/0.1-3.5ohm (VW/Bypass mode)
- Battery type: 1x 21700/18650 not included
- Maximum charging current: 2A
- Thread type: 510 thread
- Compatible with 21700/18650 Battery
- Offering a High Drain 4000mAh 21700 Battery for Option (not included)
- Comfortable to Hold and Carry
- 100W Powerful Output & 0.91-inch Large Display
- High Compatibility to 25mm diameter tank
- 2A Maximum Charging Current for Quick Charge
- Firmware upgrading
- New HW1-C (ceramic) Coil
- Retractable Top Fill
- Easy to Clean, and Extendable to 4ml
It comes with
- 1x iStick Pico 21700
- 1x ELLO Atomizer
- 1x HW2 Dual-Cylinder 0.3ohm Head (pre-installed)
- 1x QC USB Cable
- 1x HW1-C Single-Cylinder 0.25ohm Head
- 2x User Manuals
- Spare Parts
Attention: Although this device is designed to be waterproof and shockproof, please DO NOT expose it into water or damage it on purpose.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
We highly recommend using an external battery charger for this battery mods, as it helps with balanced charging and prolong the life of the battery and mod.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. MyVpro.com and any of MyVpro.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
MyVpro.com and any or all of MyVpro.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws