AsMODus .Blank RDA 24MM Top Air Flow
AsMODus .Blank RDA 24MM Top Air Flow
The .Blank RDA utilizes a build deck design similar to the Bunker and C4 RDAs, with large, wall-like posts located on each side of the atomizer acting as chamber reducers, condensing the vapor produced in the chamber for peak flavor and vapor production. The leads of the coil can be tightened in place with the use of two hex grub screws, and the outer curved edges of the posts allow for the leads to be trimmed to the perfect length after the grub screws are tightened, making installation a breeze. The bottom of the large juice well takes a concave form, allowing for any juice fed into the RDA to be funnelled towards the wick.
We have taken the liberty of integrating a unique leak resistant top down airflow path into the design of the .Blank that allows for the incoming air to enter the atomizer through an array of 6 separate top airflow slots. These adjustable slots are designed to reduce turbulence with the additional benefit of preventing leakage, a welcome feature for fans of squonker mods, and can be fine tuned by simply rotating the exterior barrel when the top cap is mounted on the base. A set of locking notches and protrusions machined into the top cap and deck help to keep the top cap in the optimal position for intense airflow sure to produce dense, rich clouds. This locking design allows for the .Blank to be easily removed from a mod even when the threads are seized up. Incoming air enters through top inlets and is directed downwards through the posts before turning inwards towards the center of the .Blank, where it enters the chamber at the perfect angle to come in contact with the bottom of the installed coil for optimal flavor and vapor production. The cap of the .Blank is deeply engraved with an asMODus wheel on each side, and features a low-profile ceiling for optimal flavor with a PEEK disc used for the adjustable airflow system. Topping off this gem of a rebuildable dripping atomizer is a tapered 810 wide bore Delrin drip tip which allows for immense amounts of flavor while allowing for deep, lung-filling inhales. The pinnacle of our constantly evolving series of RDAs, the .Blank is sure to hit you as hard as a round fired at point blank range.
- 24mm diameter
- Compatible with single coil builds
- Leak resistant
- Adjustable sextuple top airflow slot design
- Turbulence reducing airflow slots
- High quality stainless steel construction
- Chamber reducing hollow wall style posts
- Low profile ceiling
- Concave juice well floor
- Deep juice well
- Leads tightened with hex grub screws
- PEEK insulator and airflow disc
- Tapered 810 wide bore Delrin drip tip
- Stainless Steel plated standard and BF compatible 510 pins
- 510 connection
It comes with:
- 1x asMODus .Blank 24mm BF RDA
- 1x BF squonker 510 pin (pre-installed)
- 1x Standard 510 pin
- 2x Oni 0.2Ω triple fused Clapton coils
- 2x Allen key
- 1x Spare parts bag
- 1x User manual
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. Myvpro.com and any of Myvpro.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
Myvpro.com and any or all of Myvpro.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.