EHPro Cold Steel 100w TC Mod
EHPro Cold Steel 100w TC Mod
EhPro Cold Steel 100 Mod is designed in collaboration with long time YouTube vape mod reviewer AmbitionZ Vaper. Made from a combo of strong Brass, Zinc Alloy and Stainless steel, it is a durable mod with enough style to catch anyone's eye. Powered by a 21700 battery (not included), this mod can fire up to 120W with ultrafast firing speed. Ehpro also allows you to use 20700 or 18650 batteries with the included battery sleeve. This device also can fire in PWR, TEMP, CURVE, VOLT, and BYPASS modes to allow for the most customization in such a tough mod. You can recharge the battery using the micro-USB port, and is firmware upgradable.
- Dimensions: 91.5mm x 39mm x 27.5mm
- Brass, Zinc Alloy, Stainless Steel Construction
- Powered By Single High Amp 18650/20700/21700 Battery (Sold Separately)
- Wattage Range: 5W - 120W
- Power Output: 80W - 120W
- Voltage Range: 0.5V - 8.0V
- Output Mode: POWER / TC-Ni / TC-SS / TC-Ti / CURVE / VOLT / BYPASS
- Resistance Range: 0.05Ω – 3.0Ω
- Temperature Range: 100°C - 315°C / 200°F - 600°F
- Threaded Bottom Battery Cap
- 1.8A Micro USB Charging
- Firmware Upgradeable
- Protections: Short Circuit, Reverse Battery, Over-Heat, 10 Seconds Switch Timeout, Over-Current, Low Voltage, Weak Battery, Over-Charge
In the Package:
- 1 x Ehpro Cold Steel 100 Mod
- 1 x Belt Loop Holster
- 1 x 18650 battery Adapter
- 1 x USB Cable
- 1 x User Manual
- 1 x Warranty Card
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. Myvpro.com and any of Myvpro.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
Myvpro.com and any or all of Myvpro.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.