Mesh Wires by VandyVape -5ft

Sold out
$6.99
$4.99
19 reviews
Options
-
+

Mesh Wires by VandyVape -5ft

Description:

Vandy vape mesh series vape wires,5ft per reel,three different mesh vape wires available,made of kanthal A1,NI80 and SS316L.the mesh wire increase the surface of area ,will bring you different vaping experience.recommend works with mesh best vape RDA.

  • KA1 mesh wire,5ft,2.8ohm/ft 80mesh
  • NI80 mesh wire,5ft,1.8ohm/ft 100mesh
  • SS316L mesh wire,5ft,1.2ohm/ft 150mesh
  • SS316L mesh wire,5ft,1.2ohm/ft 200mesh

 

Package:

1*mesh vape wire(5ft/reel)

Note:this vape coils only for experienced user only! please ensure you have basic knowledge on how to properly to use it.

1)if the coils are sub ohm coils,the user should be sure that the tank and mods can handle the sub ohm resistance coils,please make sure you have great undersanding of them,if you are not sure,please don not order and use,welcome contact us any time to get help.

2)smokstore.us will not responsible or liable for any injury,damage,defect,permanent or temporary that may be caused by the improper use of li-ion battery,coils,tanks,mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.

Customer Reviews
4.3 Based on 19 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • flavor
  • some
  • battery life
  • Lots
  • stuff
  • mesh
  • Kanthal
  • problem
  • roll
  • Lock RDA
A My Vpro Customer
AS
04/14/2020
Amy S.
United States United States
I got SS mesh (300 & 400)

It works well. I'm using some of the 300 mesh in my Yachvape Mesh Lock RDA. This stuff is wattage hungry. At 50W I get very little vapor. The coil is ohming at .16, and at 70W it's much better. I take long drags no problem. The flavor is pretty darn good. The vapor makes my mouth pretty dry. I did I lots of water when using it. I like this stuff but I also like the plain old Kanthal mesh.

SC
03/07/2020
Sadie C.
United States United States
Great Mesh

This mesh was really easy to use. Just trim to an existing mesh strip and install. Found that the KA1 ohms out to about .11. Works fantastic at about 56 to 58 watts. My battery life with this mesh is outstanding. 1 strip lasts me about a month with a single burn and renwick. I figured I can get about 85 coils off of this 1 roll. Outstanding value. I highly recommend.

TC
02/05/2020
Tony C.
United States United States
Easy to work with; cost-effective

While the pre-cut mesh saves time, using this to build allows you to fine-tune the build (in terms of size and resistance) to exactly what's best for your needs. The mesh is easy to work with, easy to cut, and a lot cheaper per build than the pre-cut versions.

F
02/01/2020
Frank .
United States United States
Good mesh

I purchased the Kanthal mesh for my Kylin M. After cutting to size I am able to get between .10 and .11 ohm. The mesh itself is a bit stiff but is easy to work with. There seems to be a short break in period to the mesh but after that it works well. The flavor is good and I get a nice warm saturated vape at 58 watts. I have been using this mesh for about two weeks with no indication of it needing to be cleaned. The best part is that I have estimated that I will be able to get about 80 strips off of this roll. Will be ordering more to add to my stock.

VB
11/01/2018
Verified B.
USA
no respect to the customers and no feedback to custoers .

no respect to the customers and no feedback to custoers