VandyVape Mesh RDA

Sold out
83 reviews

Vandy Vape Mesh RDA

Vandy Vape Mesh RDA Tank, build the power of mesh RDA. The rebuildable platform is so strong that can fit for the mesh wire or standard coil. The best first strong Vandy Vape Mech RDA for you. It is compatiable with all the 510 thread mod in the market.

Main Feature:

1. Compatiable with mesh wire and standard wire, build the power of mesh RDA
2. Pre-build Ni80 Mesh Wire, Kanthal A1 Mesh Wire, SS316L Mesh Wire for you to choose
3. All the standard DIY wire for you to choose
4. Including Ultem drip tip and Doc tip
5. Bottom feeding squonk pin


  • Length 25mm
  • Diameter 24mm
  • Capacity 1.0 ml

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. and any of’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making. and any or all of’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.


Customer Reviews
4.3 Based on 83 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Verified B.
not worth it. .

flavor is good if u know how to wick it right, but this thing waste juice cause there Is such a shallow deck


works great

Nice RDA!

Mesh RDA is very flavorful! It is so easy to build. Love that it is squonkable. I did need to cut the mesh a little both length and width. The small mesh samples are a little too wide for the clamp holes. It cuts easy with a sharp scissor. Resistance turned out to be 0.18 ohms. Chucks the clouds too. Works great in TC. The cotton loops from VandyVapes work well in the mesh. It is thick and holds together well. Holds a couple ml of juice.


I've used mesh in the past, only as a wicking material, not as the coil. As such it is a unique vape. I would like to try this RDA with coils as well and I think it will do well that way also.

Vandy mesh ,4 1/2 stars still working on finding that 1/2

Nickle mesh tried out first , cut about 5 mm off the strip supplied , worked in a cotton rope purchased from them in as snug as possible , used a wild blueberry homemade vg with 1.5 -2 mg. Nic , no distilled water this time , didn't want it to pop , I'll try that later . Crisp flavor lite flavor until it broke in then the flavor got better and better , after 5 days flavor still great . Almost didn't want to try another type of mesh , on to the kanthol mesh , clean crisp only one day and flavor already getting better, break-in is similar to a Clapton coil but easier to clean , Juice well is shallow so I have been more careful to saturate the cotton not to over fill ,closed off about half the air flow to help excess juice not escape , was running 80 , 90 100, 110 watts , gets really hot after 3 pulls , makes the drip tip seem way to short , now running 50- 60 not getting as hot, still getting very good clouds enjoying the lower watts on my siegeli 150 snow wolf . Only occasionally hitting a big 100 wat hit learning how to use this mesh has been quite easy . First try with the temp control stainless mesh went rough , maybe having trouble wicking , I may try it again, ugh bad hits on stainless are terrible lol, nicely fitting o rings fit is perfect , drip tip is tight , nice , air flow is fairly quiet, nice , , think I will buy one for my son , can't wait to try the two staple Clapton coils, it is so easy the install mesh should be a snap to install the Clapton coils ! Huge slot to just drop them in, Note to self, have to get a squanker mod to try that for the first time , this has a bottom hole to push juice from below into the cotton. I'm going to HAVE to try this feature ! , thanks for a great dropper .