Geek Vape AN 2(Aegis Nano 2) Pod System

Geek Vape AN2 (Aegis Nano 2) Pod System

The Geekvape AN2, also sold as the Aegis Nano 2, brings the Aegis line's rugged construction down to pod size without treating durability as a marketing line. IP67 tri-proof protection means the chassis genuinely resists water, dust, and impact, so a drop on pavement or a session in the rain is not the end of the device - a real consideration for anyone who works outdoors or carries a vape loose in a bag. An 1100mAh integrated battery drives 5W to 30W of adjustable output through USB-C charging, and Geekvape rates it for roughly two days of use per charge under typical conditions. A 0.69-inch display shows wattage, resistance, and battery, adjustable through the navigation buttons, and the device fires by draw or button. The kit includes two 2mL N Series pods - a 0.6ohm for a looser RDL draw and a 1.2ohm for tight MTL - both using a leak-proof top-fill system that refills without pulling the pod apart. Precision airflow adjustment covers the range between the two styles, and because the AN2 uses the same N Cartridges as the original Aegis Nano, anyone upgrading can keep using their existing pods. Built from zinc alloy with leather and food-grade silicone, it weighs 25g and measures 87mm tall.

WARNING: This product is intended for use with nicotine-containing e-liquid. Nicotine is an addictive chemical. For adults 21+ only.

Key Features

• IP67 Tri-Proof Rating - water, dust, and shock resistant
• 1100mAh Integrated Battery - rated for around two days of typical use
• 5-30W Adjustable Output - covers MTL through to RDL
• 0.69-inch Display - wattage, resistance, and battery status
• Dual Firing - draw-activated or button-activated
• Two Pods Included - 0.6ohm for RDL, 1.2ohm for MTL
• 2mL Top-Fill Pods - leak-proof refilling, no disassembly
• Precision Airflow Adjustment - stepless draw control
• N Cartridge Compatible - works with original Aegis Nano pods
• USB-C Charging
• Zinc Alloy Build - 87mm tall, 25g

Specification Table

What's Included

• 1 x Geekvape AN2 (Aegis Nano 2) Device
• 1 x Geekvape N Cartridge 2mL, 0.6ohm (Pre-Installed)
• 1 x Geekvape N Cartridge 2mL, 1.2ohm
• 1 x USB Type-C Cable
• 1 x User Manual
• 1 x Warning Card

Available Colors

Jungle Green · Midnight Dark · Moon Gray · Ocean Blue · Polar Silver · Sunset Yellow

FAQ

Q: Is the AN2 the same as the Aegis Nano 2?
A: Yes. AN2 is Geekvape's shorthand for the Aegis Nano 2 - same device, two names. You will see it listed either way.

Q: What is the difference between the 0.6ohm and 1.2ohm pods?
A: The 0.6ohm runs at higher wattage for a looser RDL draw with more vapor, and suits lower-strength e-liquid. The 1.2ohm is a tight MTL pod at lower wattage, better for nic salts and a cigarette-like draw. Both are included.

Q: Do my original Aegis Nano pods fit?
A: Yes. The AN2 uses the same N Series cartridges as the first-generation Aegis Nano, so existing pods carry over.

Q: What does IP67 protect against?
A: Dust ingress, temporary water immersion, and impact. It handles rain, a spill, or a drop onto a hard surface. It is not rated for prolonged submersion, and the USB-C port should be dry before charging.

Q: Does it come with e-liquid?
A: No. The pods are refillable and ship empty. Fill them through the top-fill port with the e-liquid or nic salt of your choice.

Q: Can I replace just the coil?
A: No. The coil is integrated into the pod, so you replace the whole cartridge rather than a separate coil head.

Q: How often should I replace the pod?
A: Typically one to two weeks depending on usage and e-liquid. Replace it when flavor turns muted or takes on a burnt edge. Sweetened and dark e-liquids shorten coil life.