Geek Vape Kloud Pod Kit
The Geekvape Kloud sits between a disposable and a full pod system, and that is the point. It carries a 10mL refillable pod - larger than most disposables on the shelf - and the pod is rated for up to three refills, which is how the device reaches up to 35,000 puffs across its life. You fill it with whatever e-liquid you want instead of being locked into a factory flavor, but you skip the coil swapping and wattage adjustment that a conventional pod system asks of you. A 1000mAh battery runs a fixed 18W output through a 0.6ohm mesh coil, and because the power is preset there is nothing to configure - it is draw-activated, so you inhale and it fires. Adjustable airflow covers the range from a tight MTL pull to a looser RDL draw, and refills go in through a side-fill port rather than requiring you to pull the pod apart. A smart LED indicator shows battery status and USB-C charging tops it back up. Note that the device ships empty - e-liquid is not included and is purchased separately.
WARNING: This product is intended for use with nicotine-containing e-liquid. Nicotine is an addictive chemical. For adults 21+ only.
Key Features
- 10mL Refillable Pod - larger capacity than most disposables
- Up to 3 Refills - roughly 35,000 total puffs across the device life
- Ships Empty - fill with the e-liquid of your choice, sold separately
- 1000mAh Battery - rechargeable over USB-C
- Fixed 18W Output - no settings to adjust
- 0.6ohm Mesh Coil - integrated, consistent flavor
- Adjustable Airflow - tight MTL through to open RDL
- Side-Fill Port - refill without disassembling the pod
- Draw-Activated - no buttons, no setup
- Smart LED Indicator - battery status at a glance
- Pocket-Sized - 90.9mm tall, 25.5mm thick
Specification Table
| Brand | Geekvape |
|---|---|
| Product | Kloud Refillable Pod Kit |
| Pod Capacity | 10mL |
| Max Puffs | Up to 35,000 (Across All Refills) |
| Refills | Up to 3 Times |
| Battery Capacity | 1000mAh Integrated Rechargeable |
| Output Power | 18W (Fixed) |
| Coil Resistance | 0.6ohm |
| Coil Type | Mesh (Integrated, Non-Replaceable) |
| Airflow | Adjustable (MTL to RDL) |
| Fill System | Side-Fill |
| Operation | Draw-Activated |
| Indicator | Smart LED |
| Charging | USB Type-C (5V/1A) |
| Dimensions | 90.9mm x 34mm x 25.5mm |
| Refillable | Yes |
| Ships Filled | No (Empty Device) |
What's Included
- 1 x Geekvape Kloud Pod Kit Device (Empty)
- 1 x User Manual
- 1 x Warning and Info Card
FAQ
Q: Does it come with e-liquid?
A: No. The Kloud ships empty. You fill it yourself through the side-fill port with the e-liquid or nic salt of your choice, purchased separately.
Q: How does it reach 35,000 puffs?
A: The 10mL pod is rated for up to three refills, and 35,000 is the combined figure across the full life of the device rather than what a single fill delivers. Real-world results depend on draw length and airflow setting.
Q: Is this a disposable or a pod system?
A: Both, in a sense. It refills and recharges like a pod system, but the coil is built into the pod and cannot be replaced, so once the pod is spent the device is finished. Think of it as a disposable you can refill three times.
Q: Can I adjust the wattage?
A: No. Output is fixed at 18W and tuned for the 0.6ohm coil. The only adjustment on the device is airflow.
Q: What e-liquid should I use?
A: A 0.6ohm coil at 18W suits nic salts at moderate strength or lower-strength freebase. Very high-VG liquid may struggle to wick properly in this coil, so a 50/50 or 60/40 blend is the safer choice.
Q: What is the difference between MTL and RDL airflow?
A: Closing the airflow gives a tight MTL draw similar to a cigarette. Opening it produces a looser RDL pull with more vapor. The slider covers the range between the two.
Q: Can I replace the coil or the pod?
A: No. The coil is integrated and there are no replacement pods for this device. When flavor degrades or the pod reaches its refill limit, the device is replaced.
