Geek Vape Z FLi Sub-Ohm Tank
Geek Vape Z FLi Sub-Ohm Tank
The Geekvape Z Fli is the tank that finally fixed the one thing everyone complained about in the Zeus line - the fill port. Instead of unscrewing a top cap and fighting a rubber plug, you slide the flip-top cap forward, pour, press down, and slide it back. That is the whole refill. Underneath, it is still built on the top airflow leakproof system the Z series is known for: because the e-liquid sits below the air inlets, this design leaks far less than bottom-airflow tanks, which matters when a tank spends its day in a pocket or a bag. Capacity is 5.5mL in a 29mm stainless steel body with an 810 wide-bore drip tip, and dual slotted top airflow adjusts from a restricted pull to fully open DTL. The tank ships with two of the new Z XM coils - a 0.15ohm pre-installed and a 0.4ohm spare - rated by Geekvape for double the service life of the standard Z coils, roughly 60mL of e-liquid per coil. It also accepts the full Z Series coil range, so existing Zeus coils carry over. A standard 510 connection means it fits essentially any box mod. This is a tank only - no battery or mod is included.
WARNING: This product is intended for use with nicotine-containing e-liquid. Nicotine is an addictive chemical. For adults 21+ only.
Key Features
- Tank Only - requires a 510 box mod, sold separately
- Flip-Top Fill Cap - slide, pour, close, no unscrewing
- 5.5mL Capacity - fewer refills between fills
- Top Airflow Leakproof System - e-liquid sits below the air inlets
- Two Coils Included - 0.15ohm XM pre-installed, 0.4ohm XM spare
- Z XM Double-Lifespan Coils - rated for around 60mL per coil
- Full Z Series Compatibility - works with existing Zeus coils
- Dual Slotted Top Airflow - precise, adjustable DTL control
- Press-Fit Coil Installation - no threading, swap in seconds
- 810 Wide-Bore Drip Tip
- Stainless Steel Build - 29mm diameter, 51.5mm tall
- Standard 510 Connection - fits nearly any box mod
Specification Table
| Brand | Geekvape |
|---|---|
| Product | Z Fli Sub-Ohm Tank (Tank Only) |
| Tank Capacity | 5.5mL |
| Tank Diameter | 29mm |
| Height | 51.5mm |
| Tank Material | Stainless Steel and Glass |
| Fill System | Top-Fill, Flip Cap |
| Airflow | Adjustable Dual Slotted Top Airflow |
| Coil Support | Geekvape Z Series Coils |
| Coil Installation | Press-Fit |
| Included Coils | Z 0.15ohm XM (70-85W), Z 0.4ohm XM (50-60W) |
| Drip Tip | 810 Wide Bore |
| Connection | Threaded 510 |
| Vaping Style | DTL (Direct-to-Lung) |
| Weight | 74g |
| Battery Included | No (Tank Only) |
What's Included
- 1 x Geekvape Z Fli Tank (5.5mL)
- 1 x Z 0.15ohm XM Coil, 70-85W (Pre-Installed)
- 1 x Z 0.4ohm XM Coil, 50-60W (Spare)
- 1 x Spare Glass Tube (5.5mL)
- 1 x Coil Removal Tool
- 1 x Spare Parts Pack
- 1 x User Manual
Available Colors
Black · Blue · Gunmetal · Rainbow · Silver
Compatible Z Series Coils
- Z 0.15ohm XM (70-85W) - double lifespan, included pre-installed
- Z 0.4ohm XM (50-60W) - double lifespan, included as spare
- Z 0.15ohm KA1 (80-90W) - warmest output, biggest clouds
- Z 0.2ohm KA1 (70-80W) - balanced flavor and vapor
- Z 0.25ohm Dual (45-57W) - lower wattage, longer battery life
- Z 0.4ohm (60-70W) - most restricted of the range
FAQ
Q: Does this come with a mod or battery?
A: No. This is a tank only. It uses a standard 510 connection and requires a box mod, sold separately, to work.
Q: Which coils does the Z Fli use?
A: The full Geekvape Z Series (Zeus) coil range, including the new Z XM coils and the older KA1 builds. Two XM coils come in the box; the rest are sold separately.
Q: What makes the Z XM coils different?
A: Geekvape rates them for twice the service life of standard Z coils - roughly 60mL of e-liquid per coil instead of 30mL. They fit the same tank as the older Z coils.
Q: What is the difference between the Z Fli and the Z Sub-Ohm Tank?
A: The Z Sub-Ohm Tank holds 5mL and uses a quick-change coil system with a screw-off top cap. The Z Fli holds 5.5mL and replaces that with a flip-top fill cap, plus support for the double-lifespan XM coils.
Q: Which coil should I start with?
A: The 0.15ohm XM comes pre-installed and runs at 70-85W for the fullest clouds. Drop to the 0.4ohm XM at 50-60W if you want a more restricted draw or better battery life from your mod.
Q: What e-liquid should I use?
A: High-VG freebase at low nicotine strength, typically 3mg or 6mg. This is a sub-ohm DTL tank - nic salts at these wattages would deliver far too much nicotine per puff.
Q: Does it really not leak?
A: The top airflow design places the air inlets above the e-liquid, which eliminates the most common leak path in sub-ohm tanks. It is not immune to flooding from over-tightening or a badly seated coil, but it is markedly more reliable than bottom-airflow designs.
