GeekVape Aegis Boost 3 Pod Kit

Geekvape Aegis Boost 3 Pod Kit

The Geekvape Aegis Boost 3 is the most protected device in the Boost line, carrying an IP68 tri-proof rating - a step above the IP67 found on most Aegis hardware, covering dust, water, and shock resistance built into the chassis rather than promised on the box. A 3000mAh integrated battery drives 5W to 60W through the AS Chip 4.0, which runs six working modes: Smart sets wattage automatically for whichever coil you install, Power hands manual control back, Boost pushes output for denser vapor, Memory recalls your settings per coil, Eco stretches the battery, and TC-TCR holds a precise coil temperature. A 0.96-inch color display keeps everything visible, and biosensing Smart Lock unlocks the device on human touch instead of a button combination. The 5mL B60 pod is the same cartridge used by the Aegis Boost 2, so anyone upgrading keeps their existing pods, and it fills from the top with a leakproof top-airflow design. The kit ships with two B Series coils - a 0.2ohm pre-installed for DTL at 50-58W and a 0.6ohm for RDTL at 15-25W - and accepts the full B Series range.

WARNING: This product is intended for use with nicotine-containing e-liquid. Nicotine is an addictive chemical. For adults 21+ only.

Key Features

• 3000mAh Integrated Battery - around a full day for most vapers
• 5-60W Output Range - covers RDTL through to full DTL
• IP68 Tri-Proof Rating - dust, water, and shock resistant
• AS Chip 4.0 - fast, stable firing across the range
• Six Working Modes - Smart, Power, Boost, Memory, Eco, and TC-TCR
• Biosensing Smart Lock - unlocks on touch, no button sequence
• 0.96-inch Color Display - wattage, mode, resistance, and battery
• 5mL B60 Pod - shared with the Aegis Boost 2, top fill
• Top Airflow Leakproof Design - adjustable, e-liquid sits below the inlets
• Two Coils Included - 0.2ohm pre-installed and 0.6ohm spare
• B Series Compatible - full coil range fits
• USB-C Charging - 5V/2A

Specification Table

What's Included

• 1 x Geekvape Aegis Boost 3 Device
• 1 x Geekvape B60 (Aegis Boost 2) Pod, 5mL
• 1 x B Series 0.2ohm Coil, 50-58W (Pre-Installed)
• 1 x B Series 0.6ohm Coil, 15-25W
• 1 x Coil Tool
• 1 x Type-C Charging Cable
• 1 x User Manual
• 1 x Smart Lock Guide Card

Available Colors

Black · Midnight Gold · Midnight Red · Rainbow Purple · Sapphire Blue · Silver · Sunset Red · Teal Blue

FAQ

Q: Do my Aegis Boost 2 pods fit the Boost 3?
A: Yes. The Boost 3 uses the B60 (Aegis Boost 2) pod, so existing pods and coils carry straight over from the previous generation.

Q: What do the six working modes do?
A: Smart sets wattage automatically for the installed coil. Power gives manual control. Boost raises output for denser vapor. Memory recalls your last settings per coil. Eco lowers output to stretch the battery. TC-TCR holds a set coil temperature.

Q: What is the difference between the two included coils?
A: The 0.2ohm runs at 50-58W for a full DTL draw with warm, dense vapor. The 0.6ohm runs at 15-25W for a restricted RDTL pull and better battery life. The 0.2ohm comes pre-installed.

Q: What does IP68 protect against?
A: Dust ingress, water immersion, and impact. It is a step above the IP67 rating used on most Aegis devices. Keep the USB-C port dry before charging.

Q: How does the Smart Lock work?
A: Biosensing technology detects human touch to unlock the device, rather than requiring a button sequence. Fire Lock is also available if you want the device fully locked in a pocket or bag.

Q: Which coils can I buy for it?
A: The full Geekvape B Series range, including 0.2ohm, 0.3ohm, 0.4ohm, and 0.6ohm. Note these are not interchangeable with P Series, M Series, or G Series coils.

Q: What e-liquid should I use?
A: Higher-VG freebase at 3mg or 6mg for the 0.2ohm at DTL wattages. The 0.6ohm at 15-25W handles 50/50 blends and moderate-strength salts.

Q: Does it come with e-liquid?
A: No. The pod is refillable and ships empty. Fill it through the top port with the e-liquid of your choice.