SMOK LP2 Replacement Coils
SMOK LP2 Replacement Coils are the genuine press-fit coils for SMOK's LP2 pod platform, used across the RPM 4, Nord 50W, Morph Pod-80, Morph S Pod-80 and G-Priv Pod kits. Three resistances cover the full range of draws: 0.23Ω Mesh for warm direct-lung clouds at 20–45W, 0.4Ω Mesh for a restricted DL middle ground around 25W, and 0.6Ω DC MTL dual-coil for a tighter mouth-to-lung pull at 15–25W. Installation is press-fit — push the coil into the base of the LP2 pod, no threading. Sold in packs of 5.
Key Features
- Genuine SMOK LP2 replacement coils
- Three options: 0.23Ω Mesh (20–45W), 0.4Ω Mesh (~25W), 0.6Ω DC MTL (15–25W)
- Mesh builds for faster ramp-up and fuller flavor
- Press-fit installation — no threading, no tools
- Covers MTL, restricted DL and full DL styles from one coil family
- 5 coils per pack
- Fits the LP2 pod only — check your pod before ordering
Specification Table
| Specification | Details |
|---|---|
| Brand | SMOK |
| Product | LP2 Replacement Coil |
| Resistances | 0.23Ω Mesh / 0.4Ω Mesh / 0.6Ω DC MTL |
| Wattage Range | 20–45W / ~25W / 15–25W |
| Coil Type | Mesh (0.23Ω, 0.4Ω), Dual Coil (0.6Ω) |
| Installation | Press-fit |
| Compatible Pod | SMOK LP2 Pod |
| Compatible Kits | RPM 4, Nord 50W, Morph Pod-80, Morph S Pod-80, G-Priv Pod / G-Priv Pro Pod |
| Quantity | 5 coils per pack |
What's Included
- 5 x SMOK LP2 Replacement Coils (resistance as selected)
FAQ
Q: Which devices do LP2 coils fit?
A: SMOK kits that use the LP2 pod — the RPM 4, Nord 50W, Morph Pod-80, Morph S Pod-80, G-Priv Pod and G-Priv Pro Pod.
Q: Will LP2 coils fit my LP1 pod?
A: No. LP1 and LP2 are different coil families and are not interchangeable. Check the marking on the pod itself, not just the name of your device.
Q: Which resistance should I choose?
A: 0.23Ω Mesh for warm, airy direct-lung vaping at higher wattage. 0.4Ω Mesh for a restricted direct-lung draw in the middle. 0.6Ω DC MTL for a tight, cigarette-like mouth-to-lung pull.
Q: What e-liquid works with each coil?
A: The 0.23Ω and 0.4Ω mesh coils suit high-VG freebase e-liquid at 3mg or 6mg. The 0.6Ω DC MTL coil suits 50VG/50PG nicotine salts — high-strength salt in a 0.23Ω coil would be far too harsh.
Q: How do I install one?
A: Press the coil firmly into the base of the LP2 pod until it seats — no screwing required. Then prime it: add a few drops of e-liquid directly onto the cotton ports, fill the pod, and let it sit 5–10 minutes before the first puff.
Q: How long does a coil last?
A: Typically 1–2 weeks, depending on wattage, how sweet your e-liquid is, and how often you vape. Replace it when flavor dulls or you taste burning.
