SMOK Novo 4 Replacement Pods
SMOK Novo 4 Replacement Pods
The SMOK Novo 4 Replacement Pods are official empty replacement cartridges for the SMOK Novo 4 Pod System, sold in a pack of three. Each pod holds 2mL of e-liquid and refills through a silicone-stoppered side port, so you can top up without removing the pod from the device. Because the pods ship empty and without coils, you choose the resistance that suits your vaping style from the SMOK LP1 coil series — 0.8Ω Meshed for warmer, more vapor-forward draws, or 0.8Ω and 1.0Ω DC MTL for a tighter mouth-to-lung hit. Moulded from food-grade PCTG with a transparent juice window, they let you keep an eye on your e-liquid level and avoid dry hits. Press-fit coil installation makes swapping coils a few seconds' work, and the silicone ring at the coil base seals the gap that normally causes leaks. A magnetised gold-plated connection holds the pod firmly to the device and keeps contact clean.
Key Features
- Pack of 3 Replacement Pods — official SMOK
- 2mL E-Liquid Capacity per pod
- Empty Pods — no coil pre-installed, choose your own resistance
- Compatible with the SMOK LP1 Coil Series
- Side Fill System — silicone-stoppered port
- Press-Fit Coil Installation — quick, tool-free swaps
- Silicone Anti-Leak Ring at the coil base
- Magnetised Gold-Plated Connection
- Food-Grade PCTG Construction
- Visible Juice Window — monitor e-liquid at a glance
- Ergonomic Mouthpiece
- Available in Transparent Black and Transparent Clear
Specification Table
| Spec | Details |
|---|---|
| Brand | SMOK |
| Product | Novo 4 Replacement Pods |
| Quantity | 3 per pack |
| Capacity | 2mL |
| Material | Food-Grade PCTG |
| Colors | Transparent Black / Transparent Clear |
| Filling | Side Fill (Silicone Stoppered) |
| Coil Installation | Press-Fit |
| Connection | Magnetised Gold-Plated |
| Coil Compatibility | SMOK LP1 Series (0.8Ω Meshed, 0.8Ω DC MTL, 1.0Ω DC MTL) |
| Device Compatibility | SMOK Novo 4 Pod System |
| Coils Included | No — sold separately |
What's Included
- 3 × SMOK Novo 4 Replacement Pods (Empty, No Coils)
FAQ
Q: Do these pods come with coils?
A: No. These are empty pods with no coil installed. You'll need SMOK LP1 series coils, which are sold separately. This is intentional — it lets you pick the resistance that suits your draw style rather than being locked to one.
Q: Which coils fit these pods?
A: The SMOK LP1 coil series — the 0.8Ω LP1 Meshed, the 0.8Ω LP1 DC MTL, and the 1.0Ω LP1 DC MTL. The meshed coil runs warmer with more vapor; the DC MTL coils give a tighter draw and pair better with nicotine salts.
Q: Will these fit my Novo 4 Mini?
A: No. Despite the similar name, the Novo 4 Mini uses a different pod. These fit the standard Novo 4 only, and will not work with the Novo 2, Novo 3 or Novo X either.
Q: How do I install a coil?
A: Push the LP1 coil into the base of the pod until it seats — it's a press fit, no threading required. The silicone ring on the coil base seals against the pod to prevent leaking.
Q: How do I refill the pod?
A: Lift the silicone stopper on the side of the pod, fill with e-liquid, and press the stopper back into place. Let a freshly installed coil sit for five to ten minutes before vaping so the wick saturates fully.
Q: How often should I replace the pod itself?
A: Coils wear out well before pods do. Most vapers replace the coil every one to two weeks and the pod every few months, or sooner if the plastic clouds up, the mouthpiece gets damaged, or flavor stays muted after a fresh coil.
Q: Why is my pod leaking?
A: Usually a coil that isn't fully seated, or a side-fill stopper that isn't pressed all the way in. Check both. Very thin, high-PG e-liquid can also seep through a mesh coil — a thicker 70VG blend helps.
Q: What's the difference between the black and clear versions?
A: Appearance only. Both are transparent PCTG with the same 2mL capacity and identical performance — the black is tinted, the clear is fully see-through.
