SMOK RPM Lite Replacement Pods
Final Stock – Limited Units Available
Discontinued Model – No Restock After Sold Out
✔ Ships from US ✔ Fast Delivery
SMOK RPM Lite Replacement Pods
The SMOK RPM Lite Replacement Pods are official empty replacement cartridges for the SMOK RPM Lite 40W Pod Mod Kit, sold in a pack of three. Each pod holds a generous 3.2mL of e-liquid — noticeably more than most pods this size — and refills through a silicone-stoppered side port, so you can top up without pulling the pod out of the device. The real strength here is coil choice: these pods take the full SMOK RPM coil series, which spans six builds from a tight 1.2Ω quartz MTL coil right up to a 0.4Ω mesh for direct-lung. That means one pod platform covers everything from high-nicotine salts in a cigarette-like draw to low-nicotine freebase with real vapor output — just swap the coil. Moulded from food-grade PCTG, with press-fit coil installation, a side airflow intake and a magnetic connection that seats the pod firmly and keeps contact clean.
Compatible Coils (Sold Separately)
| Coil | Type | Typical Wattage | Draw |
|---|---|---|---|
| 1.2Ω Quartz | Quartz, single | ~12W | Mouth-to-lung |
| 1.0Ω SC | Single, Kanthal | ~14W | Mouth-to-lung |
| 0.8Ω DC | Dual coil | ~16W | Mouth-to-lung |
| 0.6Ω Triple | Triple coil | ~25W | Direct-lung |
| 0.4Ω Mesh | Mesh | ~25W | Direct-lung |
| 0.3Ω MTL Mesh | Mesh | 10–15W | Mouth-to-lung |
The 0.4Ω RPM Mesh and 0.8Ω RPM DC MTL are the two most commonly paired with the RPM Lite. An RPM RBA is also available for rebuildable use.
Key Features
- Pack of 3 Replacement Pods — official SMOK
- 3.2mL E-Liquid Capacity per pod — larger than most pods this size
- Empty Pods — no coil pre-installed, choose your own resistance
- Full SMOK RPM Coil Series Compatibility — MTL through DL in one pod
- Side Fill System — silicone-stoppered port
- Press-Fit Coil Installation — quick, tool-free swaps
- Side Airflow Intake
- Magnetic Pod Connection
- Food-Grade PCTG Construction
Specification Table
| Spec | Details |
|---|---|
| Brand | SMOK |
| Product | RPM Lite Replacement Pods |
| Quantity | 3 per pack |
| Capacity | 3.2mL |
| Material | Food-Grade PCTG |
| Filling | Side Fill (Silicone Stoppered) |
| Coil Installation | Press-Fit |
| Connection | Magnetic |
| Airflow | Side Intake |
| Coil Compatibility | SMOK RPM Coil Series (0.3Ω, 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω, RBA) |
| Device Compatibility | SMOK RPM Lite 40W Pod Mod Kit |
| Coils Included | No — sold separately |
What's Included
- 3 × SMOK RPM Lite Replacement Pods (Empty, No Coils)
FAQ
Q: Do these pods come with coils?
A: No. These are empty pods with no coil installed. You'll need SMOK RPM series coils, sold separately. This is intentional — it lets you pick the resistance that suits your draw style rather than being locked to one.
Q: Which coils fit these pods?
A: The full SMOK RPM coil series — 0.3Ω MTL Mesh, 0.4Ω Mesh, 0.6Ω Triple, 0.8Ω DC, 1.0Ω SC and 1.2Ω Quartz, plus the RPM RBA. That range is unusually wide for one pod, which is why the RPM platform stayed popular for so long.
Q: Will these fit my RPM 2, RPM 4 or RPM 5?
A: No. Those devices use their own pod and coil generations, which are not interchangeable with the original RPM platform. Check which generation your device is before ordering — SMOK's naming makes this easy to get wrong.
Q: Which coil should I pick?
A: Match it to your e-liquid. For nicotine salts at 20–50mg, use a high-resistance MTL coil (0.8Ω, 1.0Ω or 1.2Ω) for a tight, cigarette-like draw. For low-nicotine freebase at 3–6mg, use the 0.4Ω mesh or 0.6Ω triple for a looser, vapor-heavy draw.
Q: How do I install a coil?
A: Push the RPM coil into the base of the pod until it seats — it's a press fit, no threading. Then prime it: drip e-liquid onto the exposed cotton, fill the pod, and let it stand ten minutes before your first puff.
Q: How do I refill the pod?
A: Lift the silicone stopper on the side, fill with e-liquid, and press the stopper firmly back into place. Make sure it's fully seated — a partly open stopper is the most common cause of leaking.
Q: How often should I replace the pod itself?
A: Coils wear out long before pods do. Most vapers change the coil every one to two weeks and the pod every few months, or sooner if the plastic clouds up, the stopper stops sealing, or flavor stays muted after fitting a fresh coil.
Q: Why is my pod leaking?
A: Usually an under-seated coil or a side-fill stopper that isn't pressed all the way in — check both first. Very thin, high-PG e-liquid can also seep through a low-resistance mesh coil; a thicker 70VG blend helps.
