Smok RPM160 Replacement Pods
Final Stock – Limited Units Available
Discontinued Model – No Restock After Sold Out
✔ Ships from US ✔ Fast Delivery
SMOK RPM160 Replacement Pods
The SMOK RPM160 Replacement Pods are official replacement cartridges for the SMOK RPM160 Dual 18650 Pod Mod Kit. The standout figure is capacity: at 7.5mL, this is one of the largest pods SMOK has ever produced — close to double what most pod systems hold, which suits the RPM160's 160W output where e-liquid consumption runs high. The pod arrives empty with no coil installed, and accepts three separate coil families: the RPM160 0.15Ω NiCr honeycomb mesh coil built for this kit, plus the wider RPM and RGC coil series. That's an unusually broad range for one pod, letting you move between high-wattage direct-lung clouds and tighter, more restrained draws without changing hardware. Coils install press-fit — push straight in, no threading, no tools.
Coil Compatibility (Sold Separately)
| Coil Series | Notable Resistances | Character |
|---|---|---|
| RPM160 | 0.15Ω NiCr Honeycomb Mesh (40–90W) | Built for this kit — fastest ramp-up, densest vapor |
| RGC | 0.17Ω, 0.6Ω and others | Conical mesh builds, strong flavor at mid-high wattage |
| RPM | 0.3Ω to 1.2Ω across six builds | The widest range — covers MTL through direct-lung |
The RPM160 0.15Ω mesh is the intended pairing and what the kit ships with. The RPM series is the option to reach for if you want a tighter, lower-wattage draw.
Key Features
- 7.5mL E-Liquid Capacity — one of SMOK's largest pods
- Empty Pod — no coil pre-installed, choose your own
- Triple Coil Compatibility — RPM160, RPM and RGC series
- Press-Fit Coil Installation — quick, tool-free swaps
- Refillable Design
- Built for the SMOK RPM160 Dual 18650 Pod Mod Kit
Specification Table
| Spec | Details |
|---|---|
| Brand | SMOK |
| Product | RPM160 Replacement Pod |
| Capacity | 7.5mL |
| Coil Installation | Press-Fit |
| Coil Compatibility | SMOK RPM160, RPM and RGC Coil Series |
| Device Compatibility | SMOK RPM160 Dual 18650 Pod Mod Kit |
| Coils Included | No — sold separately |
| RBA Variant | Also available as a 5.5mL RBA pod with dual-coil build deck |
What's Included
- 1 × SMOK RPM160 Replacement Pod (Empty, No Coil)
FAQ
Q: Does this pod come with a coil?
A: No. It ships empty with no coil installed. You'll need to buy coils separately — either the RPM160 0.15Ω mesh, or a coil from the RPM or RGC series.
Q: Which coils fit this pod?
A: Three families. The RPM160 0.15Ω NiCr honeycomb mesh is the coil designed for this kit and the one to start with. The pod also accepts the RGC series and the full RPM series, which spans 0.3Ω to 1.2Ω and covers everything from direct-lung down to tight mouth-to-lung.
Q: Why is the capacity so large?
A: The RPM160 runs up to 160W on dual 18650 batteries. At that output you go through e-liquid fast, so a 7.5mL reservoir keeps refills to a reasonable frequency. Expect it to empty far quicker than the number suggests if you're vaping at the top of the wattage range.
Q: What's the RBA pod version?
A: A separate variant with a 5.5mL capacity and a dual-coil build deck, intended for vapers who build their own coils. Lower capacity, but full control over the build. It's a different SKU from this standard pod.
Q: Will this fit other SMOK devices?
A: No. The RPM160 pod is specific to the RPM160 kit. Despite the shared "RPM" naming, it won't fit the RPM40, RPM80, RPM 2, RPM 4, RPM 5 or Nord devices — those each use their own pod. Confusingly, the RPM160 pod accepts RPM coils, but the pod itself isn't cross-compatible.
Q: How do I install a coil?
A: Push the coil straight into the base of the pod until it seats — it's a friction fit, don't twist. Then prime it: drip e-liquid onto the exposed cotton, fill the pod, and let it stand ten minutes before your first puff.
Q: How often should I replace the pod itself?
A: Coils wear out well before pods. Most vapers change the coil every one to two weeks and the pod every few months, or sooner if it clouds up, the seals stop holding, or flavor stays flat after fitting a fresh coil.
Q: Why is my pod leaking?
A: Usually a coil that isn't fully seated, or a fill port that isn't closed properly — check both first. Thin, high-PG e-liquid can also seep past a 0.15Ω mesh coil; a thicker 70VG blend helps.
