Uwell Caliburn Koko Replacement Pod
Uwell Caliburn KOKO Replacement Pod
Keep the original Caliburn KOKO running with the official replacement cartridge — a 2mL refillable pod with an integrated FeCrAl coil, so every pod swap is also a fresh coil. The shell is moulded from food-grade plastic and fills from the top: pull off the black mouthpiece and fill through the dual ports underneath, no plug to pry out. Resistance is matched to the device — 1.2Ω for the Caliburn KOKO and 1.4Ω for the original Caliburn — and both deliver a tight, cigarette-like MTL draw. 4 pods per pack. Note that these fit the original Caliburn and Caliburn KOKO only, not the later G, A, X or KOKO Prime series.
Key Features
- 2mL refillable capacity with an integrated coil
- Integrated FeCrAl coil — a new pod means a new coil, with no separate part to install
- 1.2Ω for the Caliburn KOKO / 1.4Ω for the original Caliburn
- Top fill through dual ports — pull off the mouthpiece and fill
- Food-grade plastic construction
- Tight MTL draw — cigarette-like, designed for nicotine salts
- Magnetic fit — drops straight into the device
- 4 pods per pack
- For the original Uwell Caliburn and Caliburn KOKO only
Specification Table
| Specification | Detail |
|---|---|
| Brand | Uwell |
| Model | Caliburn / Caliburn KOKO Replacement Pod |
| E-Liquid Capacity | 2mL |
| Coil Resistance | 1.2Ω (KOKO) / 1.4Ω (original Caliburn) |
| Coil Material | FeCrAl, integrated |
| Pod Material | Food-grade plastic |
| Fill Method | Top fill, dual ports (mouthpiece removes) |
| Draw Style | MTL |
| Refillable | Yes |
| Quantity | 4 pods per pack |
| Compatibility | Uwell Caliburn, Uwell Caliburn KOKO |
What’s Included
- 4 × Uwell Caliburn / Caliburn KOKO Replacement Pods (2mL)
FAQ
Q: Which devices do these fit?
A: The original Uwell Caliburn and the Uwell Caliburn KOKO — those two only. They do not fit the Caliburn G, A or X series, and they do not fit the Caliburn KOKO Prime, which uses a completely different cartridge despite the shared name.
Q: Should I buy 1.2Ω or 1.4Ω?
A: Match it to your device: 1.2Ω is the Caliburn KOKO pod and 1.4Ω is the original Caliburn pod. If you’re unsure which device you have, the KOKO is the flat rectangular one; the original Caliburn is the taller stick.
Q: Do I need to buy coils separately?
A: No. The coil is built into the pod. When the flavor turns muted or burnt, you replace the whole cartridge — which is why they’re sold four at a time.
Q: How do I fill one?
A: Pull the black mouthpiece straight off the top of the pod to expose the dual fill ports underneath, fill to just below the top, refit the mouthpiece, then let the pod stand upright 5–10 minutes before the first draw. Priming is the single biggest factor in how long a pod lasts.
Q: What e-liquid should I use?
A: 50VG/50PG nicotine salts at mid-to-high strength. These are tight MTL pods — thick high-VG sub-ohm juice won’t wick through and will burn the coil.
Q: How long does one pod last?
A: Typically around 2–4 full tanks before flavor drops off, depending on e-liquid and usage. Heavily sweetened e-liquids shorten that noticeably by gumming up the coil.
