Uwell VALYRIAN IV Replacement Tank

Uwell VALYRIAN IV Replacement Tank

The Uwell VALYRIAN IV is the fourth generation of Uwell's flagship sub-ohm tank, built in stainless steel and high-borosilicate glass with an 8.5mL capacity and a 32mm diameter. It runs on the V-Coil platform — 0.18Ω and 0.35Ω mesh heads are included — and is fully backward-compatible with Valyrian II and Valyrian III coils, so existing coil stock carries straight over. A press-to-open top-fill cap refills it one-handed without unscrewing anything, bottom airflow control tunes the draw from restricted to wide open, and Pro-FOCS 4.0 plus Uwell's self-cleaning leak-proof design keeps condensation out of the airflow path. It finishes with a heat-resistant 810 PEI drip tip and a threaded 510 connection.

Key Features

• 8.5mL e-liquid capacity — among the largest in the sub-ohm tank class
• V-Coil platform — 0.18Ω (90–100W) and 0.35Ω (55–65W) mesh coils included
• Backward-compatible with Valyrian II and Valyrian III coils — no need to replace existing coil stock
• Press-to-open top-fill system — one-handed refills, no cap to unscrew
• Adjustable bottom airflow control for restricted through wide-open direct lung
• Pro-FOCS 4.0 flavor technology for sharper, denser flavor delivery
• Self-cleaning leak-proof design — condensation is channeled away from the airflow path
• Threaded coil installation — screw-in, not push-fit, for a secure seal
• 810 PEI drip tip — heat-resistant and stays cool at high wattage
• Stainless steel body with high-borosilicate glass, plus a silicone glass protector
• Threaded 510 connection — fits virtually any sub-ohm box mod
• Spare bubble glass and O-ring pack included
• 5 finishes — Stainless Steel, Glossy Black, Sapphire Blue, Pure Gold, Neon Rainbow

Specification Table

What's Included

• 1 × Uwell VALYRIAN IV Tank
• 1 × V-Coil 0.18Ω
• 1 × V-Coil 0.35Ω
• 1 × Bubble Glass Tube (spare)
• 1 × Silicone Glass Protector
• 1 × O-Ring Pack
• 1 × User Manual

FAQ

Q: Will my Valyrian II or Valyrian III coils work in this tank?

A: Yes. The Valyrian IV uses the same V-Coil platform, and Uwell confirms full compatibility with Valyrian II and Valyrian III coils. Any V-Coil you already own will screw straight in.

Q: What wattage should I run each coil at?

A: The 0.18Ω V-Coil is rated for 90–100W and the 0.35Ω for 55–65W. Start at the low end of the range, take a few short priming puffs, then work up — jumping straight to the ceiling on a dry coil is the fastest way to burn the cotton.

Q: Will this fit my mod?

A: It uses a standard threaded 510 connection, so it fits almost any sub-ohm box mod. At 32mm diameter it will overhang the top plate of narrower mods — check that your device is at least 30mm wide if you want a flush fit.

Q: What e-liquid should I use with it?

A: High-VG freebase e-liquid, 70VG/30PG or higher, in low nicotine strengths — typically 0–6mg. Do not use high-strength nicotine salts in a sub-ohm tank at these wattages.

Q: How do I fill it?

A: Press the top cap to slide open the fill port, insert your bottle nozzle, fill to just below the top of the chimney, then press the cap closed. Let a freshly installed coil sit for 5–10 minutes before the first draw.

Q: Is the glass replaceable, and is a spare included?

A: Yes. The kit ships with a spare bubble glass tube, an O-ring pack and a silicone glass protector. Replacement glass for the Valyrian series is widely available if you need more later.

Explore more Uwell products or browse our full range of vape tanks at MyVpro.

Compatible with: Uwell Valyrian Replacement Coils, UWELL Valyrian III Replacement Coils, Uwell VALYRIAN V-Coil Replacement Coils.