Vaperz Cloud Asgard XL 37mm RDA
Vaperz Cloud Asgard XL 37mm RDA
The Vaperz Cloud Asgard XL 37mm RDA is a giant rebuildable dripping atomizer built for extreme high-wattage vaping and massive cloud production. It features a colossal 37mm deck that easily handles the largest custom dual coils. Equipped with an internal Ultem chamber reducer, a 66-hole honeycomb intake, and a special under-coil airflow shoot, it compresses vapor to deliver surprisingly intense flavor for its size. With an extra-deep 8mL juice reservoir, it is the ultimate powerhouse dripper for heavy-duty box mods and squonk setups.
Key Features
-
Colossal 37mm Base: Massive diameter provides unparalleled room for giant custom wires and thick wicking cotton.
-
66-Hole Honeycomb Airflow: Massive exterior air holes funnel intake through a dual-stage chamber to build heavy pressure.
-
Integrated Airflow Shoot: Built directly into the deck floor to blast concentrated air channels perfectly beneath the coils.
-
Massive 8mL Juice Well: Extra-deep 8mm reservoir minimizes the need for continuous top-ups or squonk-squeezing.
-
Triple Ultem Components: Features an internal Ultem heat sink, airflow diffuser, and chamber reducer to concentrate flavor and control heat.
-
Quick-Release Squonk Pin: Switch from top-dripping to a bottom-feeding squonk system instantly using pre-set deck screws.
-
39mm Beauty Ring: Includes an oversized decorative accent ring to bridge flush lines on giant high-wattage box mods.
Specification Table
| Attribute | Specification |
|---|---|
|
Brand |
Vaperz Cloud |
|
Base Diameter |
37mm (extends to 39mm with included beauty ring) |
|
Material |
Premium Stainless Steel Construction |
|
Juice Well Depth / Capacity |
8mm Depth / Approximately 8mL Liquid Capacity |
|
Build Deck |
Four-terminal semi-postless deck design |
|
Terminal Openings |
2.5mm × 3.0mm individual post holes |
|
Coil Support |
Optimized for massive dual-coil configurations |
|
Airflow Intake |
Adjustable 66-hole dual-stage honeycomb system |
|
Drip Tip Connection |
Wide-bore 810 drip tip |
|
Positive Post |
24k Gold-Plated Positive Pin and Post |
|
Locking Mechanism |
Cap-to-rail track alignment system |
FAQ
Q: Can I use this RDA on a standard single-battery mod?
No. The 37mm base diameter will create massive overhang on standard mods, and the giant coils it requires need high-wattage dual/triple battery mods or series mechanical devices to ramp up effectively.
Q: What is the recommended coil leg length for the Asgard XL?
The manufacturer recommended pre-cut coil leg height is 5.5mm to align perfectly with the integrated lower airflow shoots.
Q: How does the airflow differ from the 30mm or Mini versions?
The XL introduces an integrated deck-shoot system below the posts, channeling the 66-hole exterior intake into highly focused, condensed streams that push right underneath the coils for enhanced vapor density.
Q: What is the easiest way to swap to squonk mode?
The deck uses a quick-release system. Instead of replacing the entire 510 pin from the bottom, you simply loosen or tighten the pre-set locking screws inside the deck to open or close the bottom-feed juice channels.
