Vaporesso Luxe PM40 Replacement Pods
Vaporesso Luxe PM40 Replacement Pods
The Vaporesso Luxe PM40 Replacement Pods are official empty cartridges for the Luxe PM40 40W Pod Mod Kit, sold two to a pack. Each pod holds 4mL of e-liquid and refills through a top-fill port, which keeps the fill opening above the liquid line and removes the most common leak path in pod systems. The pods take the Vaporesso GTX coil platform — most commonly the 0.6Ω GTX mesh rated for 20–30W and the 0.8Ω GTX mesh rated for 12–20W, covering restricted direct-lung down to a tighter mouth-to-lung draw. Coils install press-fit: push straight into the base, no threading and no tools. A magnetic connection seats the pod firmly in the device and keeps the contacts clean, and the anti-leak structure holds up well in a pocket or bag.
Coil Options (Sold Separately)
| Coil | Wattage | Draw | Pair With |
|---|---|---|---|
| GTX 0.6Ω Mesh | 20–30W | Restricted direct-lung | Low-nicotine freebase (3–6mg) |
| GTX 0.8Ω Mesh | 12–20W | Mouth-to-lung | Nic salts or 50/50 freebase |
Other resistances from the wider GTX platform also fit, letting you tune the pod well beyond these two.
Key Features
- Pack of 2 Replacement Pods — official Vaporesso
- 4mL E-Liquid Capacity per pod
- Empty Pods — no coil pre-installed, choose your own resistance
- Vaporesso GTX Coil Platform Compatible
- Top-Fill System — reduces leak risk
- Press-Fit Coil Installation — quick, tool-free swaps
- Magnetic Pod Connection
- Anti-Leak Construction
- Refillable Design
Specification Table
| Spec | Details |
|---|---|
| Brand | Vaporesso |
| Product | Luxe PM40 Replacement Pods |
| Quantity | 2 per pack |
| Capacity | 4mL |
| Dimensions | 30.45 × 33.2 × 19.55mm |
| Filling | Top Fill |
| Coil Installation | Press-Fit |
| Connection | Magnetic |
| Coil Compatibility | Vaporesso GTX Coil Series (0.6Ω 20–30W / 0.8Ω 12–20W) |
| Device Compatibility | Vaporesso Luxe PM40 Pod Mod Kit |
| Coils Included | No — sold separately |
What's Included
- 2 × Vaporesso Luxe PM40 Replacement Pods (Empty, No Coils)
FAQ
Q: Do these pods come with coils?
A: No. They ship empty with no coil installed. You'll need Vaporesso GTX coils, sold separately. This lets you pick the resistance that matches your draw style rather than being locked to one.
Q: Which coil should I pick?
A: Match it to your e-liquid. Use the 0.8Ω at 12–20W for a tight mouth-to-lung draw with nic salts or 50/50 e-liquid. Use the 0.6Ω at 20–30W for a looser, more vapor-forward draw with low-nicotine freebase. If you're switching from cigarettes, start with the 0.8Ω.
Q: Are GTX and GTX-2 coils the same thing?
A: Some retailers list these pods as GTX-2 compatible and others simply as GTX. Both refer to coils in the same Vaporesso GTX platform and fit this pod. If in doubt, look for coils explicitly listed as PM40-compatible.
Q: Which devices do these fit?
A: The Vaporesso Luxe PM40 Pod Mod Kit only. They won't fit other Luxe models — the Luxe Q, Luxe X, Luxe XR and Luxe PM40i each use their own pod, despite the shared Luxe name.
Q: How do I install a coil?
A: Push the GTX coil into the base of the pod until it seats — it's a press fit, don't twist. Then prime it: drip e-liquid onto the exposed cotton, fill the pod, and let it stand ten minutes before your first puff. Skipping this is the main cause of burnt coils.
Q: How do I refill the pod?
A: Open the top fill port, add e-liquid, and close it firmly. Because the port sits at the top, there's no need to invert the pod or worry about spilling what's already inside.
Q: How often should I replace the pod itself?
A: Coils wear out well before pods do. Most vapers change the coil every one to two weeks and the pod every few months, or sooner if the plastic clouds up, the seal stops holding, or flavor stays flat after fitting a fresh coil.
Q: Why is my pod leaking?
A: Usually a coil that isn't fully seated, or a fill port that isn't properly closed — check both first. Thin, high-PG e-liquid can also seep past a 0.6Ω mesh coil; a thicker 70VG blend helps.
