Vaporesso XIRON Replacement Pods
Vaporesso XIRON Replacement Pods
The Vaporesso XIRON Replacement Pods are official empty cartridges for the XIRON 50W Pod Mod Kit, sold two to a pack. At 5.5mL, these hold more e-liquid than almost any refillable pod on the market — enough to go a full day of heavy vaping without touching a bottle. The pod fills from the top through a silicone-stoppered port wide enough to take most standard e-liquid bottle tips, and the translucent body with a juice-level window means you can see exactly where you stand rather than guessing. Airflow adjusts through a dial built into the pod itself, so you can retune the draw without changing anything on the device. Coils install press-fit from the Vaporesso GTX platform — commonly the 0.3Ω mesh at 32–45W for a looser, vapor-forward draw or the 0.8Ω mesh at 12–20W for a tighter mouth-to-lung hit, with the GTX RBA available if you build your own. An 810 drip tip finishes the top.
Coil Options (Sold Separately)
| Coil | Wattage | Draw | Pair With |
|---|---|---|---|
| GTX 0.3Ω Mesh | 32–45W | Restricted direct-lung | High-VG freebase (3–6mg) |
| GTX 0.8Ω Mesh | 12–20W | Mouth-to-lung | Nic salts or 50/50 freebase |
Other GTX coils rated at 50W or below also fit, plus the GTX RBA for rebuildable use.
Key Features
- Pack of 2 Replacement Pods — official Vaporesso
- 5.5mL E-Liquid Capacity — among the largest refillable pods available
- Empty Pods — no coil pre-installed, choose your own resistance
- Vaporesso GTX Coil Platform Compatible (including the GTX RBA)
- Top-Fill System — silicone-stoppered, wide port
- Side Airflow Control Dial — built into the pod
- Juice Level Viewing Window
- Press-Fit Coil Installation — quick, tool-free swaps
- 810 Drip Tip
- Magnetic Pod Connection
Specification Table
| Spec | Details |
|---|---|
| Brand | Vaporesso |
| Product | XIRON Replacement Pods |
| Quantity | 2 per pack |
| Capacity | 5.5mL |
| Filling | Top Fill (Silicone Stoppered) |
| Airflow | Side Adjustable Control Dial |
| Drip Tip | 810 |
| Coil Installation | Press-Fit |
| Connection | Magnetic |
| Coil Compatibility | Vaporesso GTX Coil Series (50W and below), GTX RBA |
| Device Compatibility | Vaporesso XIRON 50W Pod Mod Kit |
| Coils Included | No — sold separately |
What's Included
- 2 × Vaporesso XIRON Replacement Pods (Empty, No Coils)
FAQ
Q: Do these pods come with coils?
A: No. They ship empty with no coil installed. You'll need Vaporesso GTX coils, sold separately. This lets you pick the resistance that matches your draw style rather than being locked to one.
Q: Which coil should I pick?
A: Match it to your e-liquid. Use the 0.8Ω at 12–20W for a tight mouth-to-lung draw with nic salts or 50/50 e-liquid. Use the 0.3Ω at 32–45W for a looser, vapor-heavy draw with high-VG freebase. If you're switching from cigarettes, start with the 0.8Ω.
Q: Will any GTX coil fit?
A: Any GTX coil rated at 50W or below, since that's the XIRON's ceiling. Higher-wattage GTX coils will physically fit but won't get enough power to perform properly, so avoid them.
Q: Where is the airflow adjustment?
A: On the pod, not the device — a dial on the side. That means the setting travels with the pod, so you can keep one tuned tight for salts and another open for freebase and just swap between them.
Q: Which devices do these fit?
A: The Vaporesso XIRON 50W Pod Mod Kit only. They won't fit other Vaporesso pod systems — the Luxe, Target and XROS families each use their own pods, despite sharing the GTX coil platform.
Q: How do I install a coil?
A: Push the GTX coil into the base of the pod until it seats — it's a press fit, don't twist. Then prime it: drip e-liquid onto the exposed cotton, fill the pod, and let it stand ten minutes before your first puff. Skipping this is the main cause of burnt coils.
Q: How do I refill the pod?
A: Lift the silicone stopper on the top of the pod, fill with e-liquid, and press the stopper firmly back in. The port is wide enough for most standard bottle tips, so you won't need a needle-tip bottle.
Q: How often should I replace the pod itself?
A: Coils wear out well before pods do. Most vapers change the coil every one to two weeks and the pod every few months, or sooner if the plastic clouds up, the stopper stops sealing, or flavor stays flat after fitting a fresh coil.
