VooPoo ITO Replacement Pods

VOOPOO ITO Replacement Pods 

The VOOPOO ITO Replacement Pods are official replacement cartridges for VOOPOO's Doric pod range, sold two to a pack. Each pod holds 2mL of e-liquid and refills through a silicone-stoppered side port, so you can top up without pulling the pod out of the device. The transparent PCTG body lets you watch your e-liquid level rather than guessing — worth more than it sounds on a 2mL pod, where running dry sneaks up quickly. What sets the ITO pod apart is its leak engineering: four layers of leak-proof rings and a redesigned internal cavity that traps condensation before it can work its way down into the device. Available in three built-in mesh coil resistances — 0.7Ω for a loose mouth-to-lung draw, 1.0Ω for standard MTL, and 1.2Ω for a tight, cigarette-like draw — or as an empty pod that accepts the wider ITO coil series if you'd rather choose your own and replace coils instead of whole pods.

Which Version Do You Need?

All four hold 2mL and fit the same devices. The built-in versions are simpler; the empty pod is cheaper to run long-term since you replace only the coil.

Key Features

• Pack of 2 Replacement Pods — official VOOPOO
• 2mL E-Liquid Capacity per pod
• Four Versions — 0.7Ω, 1.0Ω, 1.2Ω built-in coil, or empty
• Mesh Coil Technology on built-in versions
• ITO Coil Series Compatible (empty version)
• Side-Fill System — silicone-stoppered port
• Four-Layer Anti-Leak Ring Structure
• Redesigned Cavity Design — blocks condensation reaching the device
• Magnetic Pod Connection
• Transparent PCTG Body — monitor e-liquid at a glance
• MTL Optimised — ideal for nic salts and 50/50 e-liquid

Specification Table

What's Included

• 2 × VOOPOO ITO Replacement Pods (version of your choice)

FAQ

Q: Which version should I order?

A: If you want the simplest option, pick a built-in coil version and match the resistance to your draw: 1.2Ω for a tight, cigarette-like MTL hit, 1.0Ω for standard MTL, 0.7Ω for a slightly looser, warmer draw. If you'd rather replace just the coil rather than the whole pod each time, pick the empty pod and buy ITO coils separately — it works out cheaper over time.

Q: Does the empty pod come with a coil?

A: No. The empty version ships with no coil at all — you'll need VOOPOO ITO coils, sold separately. The three built-in versions have a non-replaceable coil already fitted.

Q: Which devices do these fit?

A: The VOOPOO Doric range — Doric 20, Doric 20 SE, Doric Q and Doric E. They won't fit the Argus family, which uses its own pod despite also accepting ITO coils. That's a common mix-up: ITO coils are shared across ranges, but ITO pods are Doric-specific.

Q: What e-liquid should I use?

A: These are MTL pods, so nicotine salts or 50/50 freebase e-liquid. High-VG juice is too thick to wick properly through a high-resistance MTL coil and will cause dry hits.

Q: How do I refill the pod?

A: Lift the silicone stopper on the side of the pod, fill with e-liquid, and press the stopper firmly back into place. Let a new pod stand filled for five to ten minutes before your first puff so the wick saturates fully — skipping this is the main cause of a burnt first tank.

Q: Are these really leak-resistant?

A: The four-layer sealing rings and cavity design genuinely help, and these leak less than most 2mL MTL pods. Most remaining leaks trace back to a stopper that wasn't pressed fully home, or thin high-PG e-liquid seeping through a low-resistance coil.

Q: How long does a pod last?

A: Typically one to two weeks with regular use. Heavily sweetened e-liquid caramelises on the mesh and shortens that considerably. Replace when flavor drops off or the draw starts tasting burnt.

Q: Can I clean and reuse a built-in coil pod?

A: Not really. Once the mesh is saturated with residue, rinsing won't restore it. If you find yourself wanting to, the empty pod plus replaceable ITO coils is the version you actually want.