GeekVape Aegis One Replacement Pods
Geekvape Aegis One Replacement Pods
Geekvape One Replacement Pods, also sold as Aegis One pods, are the genuine refill cartridges for the Aegis One and Aegis 1FC pod systems - one pod covers both devices. Each holds 2mL with the coil already integrated, so there is no coil head to install and nothing to prime beyond the first fill. Two builds are offered, both tuned for MTL vaping: the 0.8ohm runs at 12-16W for a slightly fuller draw with more vapor, and the 1.2ohm runs at 8-12W for the tightest, most cigarette-like pull and noticeably better battery life. Refilling goes through a top-fill port with a leak-proof seal, and the clear pod body shows the e-liquid level so you know when to top up without holding the device up to a light. Strong magnets hold the pod securely in the device while still letting you swap flavors in seconds, and top airflow keeps the draw restricted the way MTL vapers want it. Sold in packs of three.
WARNING: This product is intended for use with nicotine-containing e-liquid. Nicotine is an addictive chemical. For adults 21+ only.
Key Features
- 3-Pack - three pods per pack, coil pre-installed
- Two Resistance Options - 0.8ohm and 1.2ohm
- Fits Two Devices - Aegis One and Aegis 1FC
- 2mL Refillable Capacity
- Integrated Coil - no separate coil changes
- Top-Fill System - leak-proof seal, no disassembly
- Clear Pod Body - check e-liquid level at a glance
- Magnetic Connection - strong hold, swaps in seconds
- Top Airflow - restricted draw built for MTL
Specification Table
| Brand | Geekvape |
|---|---|
| Product | Aegis One / 1FC Replacement Pods (Pods Only) |
| Pack Count | 3 Pods Per Pack |
| Pod Capacity | 2mL |
| Coil Resistance | 0.8ohm (12-16W) / 1.2ohm (8-12W) |
| Coil Type | Integrated (Non-Replaceable) |
| Vaping Style | MTL (Mouth-to-Lung) |
| Fill System | Top Fill |
| Airflow | Top Airflow |
| Connection | Magnetic |
| Compatibility | Geekvape Aegis One, Geekvape Aegis 1FC |
| Refillable | Yes |
| Ships Filled | No (Empty Pods) |
What's Included
- 3 x Geekvape One Replacement Pods
Choosing Your Resistance
- 0.8ohm (12-16W) - slightly looser MTL draw with more vapor and a warmer hit. Works with 50/50 freebase or salts at moderate strength
- 1.2ohm (8-12W) - tightest MTL draw, closest to a cigarette, cooler and easier on battery life. Built for higher-strength nic salts
FAQ
Q: Which devices do these pods fit?
A: The Geekvape Aegis One and Aegis 1FC. Both resistances work in either device. They do not fit other Geekvape pod systems such as the Aegis Nano or Wenax series, which use different cartridge platforms.
Q: What is the difference between 0.8ohm and 1.2ohm?
A: The 0.8ohm runs at 12-16W with a slightly more open draw and more vapor. The 1.2ohm runs at 8-12W for the tightest pull, and because it draws less power it gets noticeably more vaping out of a charge.
Q: How many pods come in a pack?
A: Three. All three are the same resistance - choose which one when ordering.
Q: Do the pods come filled with e-liquid?
A: No. These ship empty and are refillable. Fill through the top port with the e-liquid or nic salt of your choice.
Q: Do I need to prime a new pod?
A: Yes. Fill it and let it sit around five minutes before the first vape so the cotton saturates fully. Skipping this is the most common cause of a burnt taste on a brand new pod.
Q: Can I replace just the coil?
A: No. The coil is built into the pod, so you replace the whole cartridge rather than dealing with coil heads and tools.
Q: What e-liquid works best?
A: 50/50 blends and nic salts. These are low-wattage MTL pods, so high-VG liquid is too thick to wick reliably and will cause dry hits.
