Uwell Caliburn 2ML Refillable Replacement Pod Cartridge
Uwell Caliburn 2ML Refillable Replacement Pod
Keep the original Uwell Caliburn running with the official replacement cartridge — a 2mL refillable pod with a 1.4Ω parallel coil built in, so every pod swap is also a fresh coil. The shell is moulded from food-grade plastic, and the top cap doubles as the mouthpiece: pull it off and fill through the dual ports underneath, with no plug to pry out. The 1.4Ω resistance is the one that shipped with the original Caliburn and is matched to its 11W output — a tight, cool, cigarette-like MTL draw on nicotine salts. 4 pods per pack. It fits the original Caliburn and the Caliburn KOKO, but not the later G, A, X or KOKO Prime series.
Key Features
- 2mL refillable capacity with the coil built into the pod
- 1.4Ω parallel coil — the original Caliburn’s native resistance, matched to its 11W output
- Tighter, cooler draw and longer battery life than the 1.2Ω version
- No separate coils to buy — a new pod is a new coil
- Dual-port top fill — the top cap is the mouthpiece, pull it off and fill
- Food-grade plastic construction
- Tight MTL draw — cigarette-like, built for nicotine salts
- Magnetic fit — drops straight into the device
- 4 pods per pack
- Fits the original Uwell Caliburn and the Caliburn KOKO
Specification Table
| Specification | Detail |
|---|---|
| Brand | Uwell |
| Model | Caliburn Replacement Pod |
| E-Liquid Capacity | 2mL |
| Coil Resistance | 1.4Ω (parallel, integrated) |
| Matched Device Output | 11W |
| Pod Material | Food-grade plastic |
| Fill Method | Dual-port top fill (top cap / mouthpiece removes) |
| Pod Connection | Magnetic |
| Draw Style | MTL |
| Refillable | Yes |
| Quantity | 4 pods per pack |
| Compatibility | Uwell Caliburn, Uwell Caliburn KOKO |
What’s Included
- 4 × Uwell Caliburn Replacement Pods (2mL, 1.4Ω)
FAQ
Q: Which devices do these fit?
A: The original Uwell Caliburn and the Uwell Caliburn KOKO. They do not fit the Caliburn G, G2, G3 or GPP series, the A3 / AK3 / AZ3 series, or the Caliburn KOKO Prime — the Prime uses a completely different cartridge despite the shared name.
Q: I have a KOKO — can I use the 1.4Ω pod?
A: Yes. The 1.4Ω and 1.2Ω pods are cross-compatible; either works in either device. The 1.4Ω simply gives a slightly tighter, cooler draw and stretches battery life a little further. Pick by preference, not by device.
Q: Do I need to buy coils separately?
A: No. The coil is built into the pod. When the flavor turns muted or burnt, you replace the whole cartridge — which is why they come four to a pack.
Q: How do I fill one?
A: Pull the top cap — it’s also the mouthpiece — straight off to expose the two fill ports, fill to just below the top, refit the cap, then stand the pod upright 5–10 minutes before the first draw. Priming is the single biggest factor in how long a pod lasts.
Q: What e-liquid should I use?
A: 50VG/50PG nicotine salts at mid-to-high strength. At 1.4Ω and 11W this is a tight MTL setup — thick high-VG sub-ohm juice won’t wick through and will burn the coil.
Q: How long does one pod last?
A: Typically around 2–4 full tanks before flavor drops off, depending on e-liquid and usage. Heavily sweetened e-liquids shorten that noticeably by gumming up the coil.
